Spindle pattern 2.

 

Sizes

ex 50 X 50 mm – 2” X 2”

par 45 X45 mm 1 3/4”

Minimum suggested handrail base size: 52mm – 2″

Kno Hints.

Spindle block lengths may need adjusting to suit height of handrail on cut string stairs.

When choosing a handrail confirm the base is wide enough to allow for top block at angle still fits within the base through turns.

Downloads.

Our download section is at the bottom of the page with Zip folders for .3dm .igs and .dwg Should you want a different file format, we would suggest downloading RhinoCad trial version, this will allow you to open our .3dm file and save it in another format that may suit your software.

3D model – for visuals .3dm .igs

2D outline – for drawings .3dm .igs

Plate 1 (pdf) Print to show clients or pin to your wall.

Full size, Split print with alignment targets for A4 or letter printers. (pdf) paste to board, cut round and take to your wood turner.

3d cad model download.
3d cad model download.
Spindle 2 shaded outline.
Spindle 2 outline
2D cad outline download.
Spindle plate 1 shaded
Spindle plate 1. Print this for your wall.
Spindle 2 split print
spindle 2-splitprint

Staircase turned spindle pattern 2. Downloads:-

Spindle pattern 2,    45 mm – 1 3/4″

 

3D model:-

Spindle-2-45mm-3d-igs.zip Membership Required: Professional – Spindle-2-45mm-3d-3dm.zip Membership Required: Professional

 

2D outline:-

Spindle-2-45mm-Outline-igs.zip Membership Required: Professional   –  Spindle-2-Outline-3dm.zip Membership Required: Professional – Spindle-2-outline-dwg.zip Membership Required: Professional

 

PDF:-

Spindle-plate-1.pdf (530 downloads)

 

Splitprint pdf’s:-

spindle-2-A4.pdf Membership Required: Professional – spindle-2-Letter.pdf Membership Required: Professional

Share: